Home
/
Toyota
/
2005 Yaris
/
Manual

Toyota 2005 Yaris, Manual, Page: 122 / 540

Share

Page: 122 / 540

Toyota 2005 Yaris Manual Download Page 122

122

3-2. Opening, closing and locking the doors

YARIS_F_WE_52F20E

■

Using the mechanical key (vehicles with a smart entry & start system)

The doors can also be locked and unlocked with the mechanical key.
(

→

P. 478)

■

Conditions affecting the operation of the wireless remote control or
smart entry & start system

→

P. 107, 132

■

If the smart entry & start system has been deactivated in a customized
setting (vehicles with a smart entry & start system)

Use the wireless remote control or mechanical key. (

→

P. 117, 478)

WARNING

■

To prevent an accident

Observe the following precautions while driving the vehicle.
Failure to do so may result in a door opening and an occupant falling out,
resulting in death or serious injury.

●

Always use a seat belt.

●

Ensure that all the doors are properly closed.

●

Do not pull the inside handle of the doors while driving.
The doors may be opened and the passengers are thrown out of the vehi-
cle and it may result in serious injury or death.
Be especially careful for the front doors, as the doors may be opened
even if the inside lock buttons are in locked position.

●

Set the rear door child-protector locks when children are seated in the rear
seats.

«
...
120
121
122
123
124
...
»

Summary of Contents for 2005 Yaris





























































































































































































































































































































































































































































































































































Reviews:

No comments