Toyota 2005 Yaris Manual Download Page 164 | Manualshive

Page: 164 / 540

background image

164

4-1. Before driving

YARIS_F_WE_52F20E

X

Vehicles with a manual transmission
While depressing the clutch pedal, depress the brake pedal.
Set the parking brake. (

→

P. 203)

Shift the shift lever to N. (

→

P. 198)

If parking on a hill, shift the shift lever to 1 or R and block the wheels as
needed.

Vehicles without a smart entry & start system: Turn the engine
switch to the “LOCK” position to stop the engine.
Vehicles with a smart entry & start system: Press the engine switch
to stop the engine.
Lock the door, making sure that you have the key on your person.

X

Vehicles with a Multidrive
Firmly set the parking brake with the brake pedal depressed, and
then shift the shift lever to D.
Release the brake pedal and gently depress the accelerator pedal.
Release the parking brake.

X

Vehicles with a manual transmission
With the parking brake firmly set and the clutch pedal fully
depressed, shift the shift lever to 1.
Lightly depress the accelerator pedal at the same time as gradually
releasing the clutch pedal.
Release the parking brake.

Starting off on a steep uphill

1
2
3

4

5

1

2
3

1

2

3

«
...
162
163
164
165
166
...
»

Summary of Contents for 2005 Yaris





























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2005 Yaris

Brand: Toyota Pages: 529

Brand: RaceChip Pages: 20

Brand: Buick Pages: 428

Brand: StowAway 2 Pages: 2

Brand: AEM Pages: 27

Brand: RBO Pages: 15

Brand: Westin Pages: 3

Brand: S3 Power Sports Pages: 2

2004 Impreza OUTBACK SPORT

Brand: Subaru Pages: 34

Brand: travall Pages: 4

Brand: ULTIMATE SPEED Pages: 10

Brand: OHIOSTEEL Pages: 2

Brand: Thule Pages: 8

2007 SLR Mclaren

Brand: Mercedes-Benz Pages: 425

Jumpy Miltispace

Brand: CITROËN Pages: 164

Brand: Directed Pages: 30

2013 Zafira Tourer

Brand: Vauxhall Pages: 289

Brand: Roadefend Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands