Toyota 2005 Yaris Manual Download Page 185

Page: 185 / 540

185

4-2. Driving procedures

riv

YARIS_F_WE_52F20E

“LOCK”

The steering wheel is locked and
the key can be removed. (Vehicles
with a Multidrive: The key can be
removed only when the shift lever
is in P.)

“ACC”

Some electrical components such
as the audio system can be used.

“ON”

All electrical components can be
used.

“START”

For starting the engine.

■

Turning the key from “ACC” to “LOCK”

Shift the shift lever to P (Multidrive) or N (manual transmission).
(

→

P. 193, 198)

■

If the engine does not start

The engine immobilizer system may not have been deactivated. (

→

P. 76)

Contact any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional.

Changing engine switch positions

Push in the key and turn it to the
“LOCK” position.

Summary of Contents for 2005 Yaris





























































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2005 Yaris

Reviews:

Toyota 2005 Yaris, Manual, Page: 185 / 540

Search results

Summary of Contents for 2005 Yaris

Reviews: