manualshive.com logo in svg

Toyota 2005 Yaris, Manual, Page: 187 / 540

Share
Download
Toyota 2005 Yaris Manual Download Page 187

187

4

4-2. Driving procedures

D

riv

in

g

YARIS_F_WE_52F20E

Engine (ignition) switch (vehicles with a 

smart entry & start system)

Check that the parking brake is set.
Check that the shift lever is set in P (Multidrive) or N (manual trans-
mission).
Firmly depress the brake pedal (Multidrive) or clutch pedal (manual
transmission).

The smart entry & start system indicator (green) will turn on. 
If the indicator light does not turn on, the engine cannot be started.

Press the engine switch.

The engine will crank until it starts
or for up to 30 seconds, whichever
is less.
Continue depressing the brake
pedal (Multidrive) or clutch pedal
(manual transmission) until the
engine is completely started.

Diesel engine only: The 
indicator turns on. The engine will
start after the indicator light goes
out.
The engine can be started from
any engine switch mode.

Performing the following operations when carrying the elec-
tronic key on your person starts the engine or changes engine
switch mode.

Starting the engine

1
2

3

4

Summary of Contents for 2005 Yaris





























































































































































































































































































































































































































































































































































Reviews:

No comments