Toyota 2005 Yaris Manual Download Page 116

Page: 116 / 540

116

3-2. Opening, closing and locking the doors

YARIS_F_WE_52F20E

Side doors

The vehicle can be locked and unlocked using the entry function,
wireless remote control, key or door lock switches.

◆

Entry function (vehicles with a smart entry & start system)

Carry the electronic key to enable this function.

Grip the handle to unlock the
doors.

Make sure to touch the sensor
on the back of the handle.
The doors cannot be unlocked
for 3 seconds after the doors are
locked.

Touch the lock sensor (the
indentation on the side of the
door handle) to lock the
doors.

Check that the door is securely
locked.

Unlocking and locking the doors from the outside

Summary of Contents for 2005 Yaris





























































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2005 Yaris

Reviews:

Toyota 2005 Yaris, Manual, Page: 116 / 540

Search results

Summary of Contents for 2005 Yaris

Reviews: