manualshive.com logo in svg

Toyota 2005 Yaris, Manual, Page: 336 / 540

Share
Download
Toyota 2005 Yaris Manual Download Page 336

336

6-4. Using the other interior features

YARIS_F_WE_52F20E

■

Vanity lights can be used when

X

Vehicles without a smart entry & start system

The engine switch is in the “ACC” or “ON” position.

X

Vehicles with a smart entry & start system

The engine switch is ACCESSORY or IGNITION ON mode.

The ashtray can be installed in a
cup holder. (

→

P. 329)

NOTICE

■

To prevent battery discharge (vehicles with vanity lights)

Do not leave the vanity lights on for extended periods while the engine is
not running.

Portable ashtray (if equipped)

WARNING

■

When not in use

Keep the ashtray closed. In the event of sudden braking or sudden swerv-
ing, an accident may occur due to an occupant being struck by the open
ashtray or ash flying out.

■

To prevent fire

●

Fully extinguish matches and cigarettes before putting them in the ashtray,
then make sure the ashtray is fully closed.

●

Do not place paper or any other type of flammable object in the ashtray.

Summary of Contents for 2005 Yaris





























































































































































































































































































































































































































































































































































Reviews:

No comments