Toyota 2005 Yaris Manual Download Page 454

Page: 454 / 540

454

8-2. Steps to take in an emergency

YARIS_F_WE_52F20E

Lower the vehicle.

Firmly tighten each wheel nut
two or three times in the order
shown in the illustration.

Tightening torque:

103 N·m (10.5 kgf·m, 76 ft·lbf)
Do not use other tools or any addi-
tional leverage other than your
hands, such as a hammer, pipe or
your foot.

Vehicles with steel wheels (except compact spare tire)

Reinstall the wheel ornament.

Align the cutout of the wheel orna-
ment with the valve stem as
shown.

Vehicles with aluminum wheels

Remove the center wheel orna-
ment by pushing from the
reverse side.

Be careful not to lose the wheel
ornament.

Stow the flat tire, tire jack and all tools.

Summary of Contents for 2005 Yaris





























































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2005 Yaris

Reviews:

Related manuals for 2005 Yaris

Brands by name

Popular brands

Toyota 2005 Yaris, Manual

Search results

Summary of Contents for 2005 Yaris

Reviews:

Related manuals for 2005 Yaris

Brands by name

Popular brands