Toyota 2005 Yaris Manual Download Page 421

Page: 421 / 540

421

8-1. Essential information

hen
trou

e ari

YARIS_F_WE_52F20E

If your vehicle has to be stopped in an

emergency

Steadily step on the brake pedal with both feet and firmly depress it.

Do not pump the brake pedal repeatedly as this will increase the effort
required to slow the vehicle.

Shift the shift lever to N.

If the shift lever is shifted to N
After slowing down, stop the vehicle in a safe place by the road.
Stop the engine.

If the shift lever cannot be shifted to N
Keep depressing the brake pedal with both feet to reduce vehicle
speed as much as possible.

Vehicles without a smart entry
& start system: Stop the engine
by turning the engine switch to
the “ACC” position.

Only in an emergency, such as if it becomes impossible to stop
the vehicle in the normal way, stop the vehicle using the follow-
ing procedure:

3
4

Summary of Contents for 2005 Yaris





























































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2005 Yaris

Reviews:

Related manuals for 2005 Yaris

Brands by name

Popular brands

Toyota 2005 Yaris, Manual

Search results

Summary of Contents for 2005 Yaris

Reviews:

Related manuals for 2005 Yaris

Brands by name

Popular brands