COOLING SYSTEM
-
Check and Replacement of Engine Coolant
C H E C K A N D REPLAC E M E N T OF
E N G I N E COOLANT
1 .
C H E C K E N G I N E COOLANT L E V E L AT RESERVE
TANK
CO-3
The cootant level should be between the
"lOW"
and
"FUll" lines.
If low, check for leaks and add coolant up to the ' 'FULL"
line.
2.
CHECK E N G I N E COOLANT Q U A LITY
There should not be any excessive deposits of rust or
scales around t h e radiator cap or radiator f iller hole, and
t h e coolant should be free from oil.
If excessively dirty, replace the coolant.
3 .
REPLACE E N G I N E COOLANT
lal
Remove the radiator
cap.
(b) Drain the coolant from the radiator and engine drain
cocks. (Engine drain cock is at l e f t front o f engine
block.)
(c)
Close the drain cocks.
(d) FiJI the system with coolant.
Use a good brand o f ethy lene-glycol base coola nt,
mixed according to the manufacturer's directions.
Capacity
(wI Front heater) :
H J 6 0 , 61
series
1 5,4 liters
1 1 6 . 3
U S qts,
1 3 . 6
Imp.
qts)
HJ75
series
1 4. 2
liters (1 5.0 US qts, 1 2.5 Imp.
qts)
(el
Install the rad iator cap.
(f)
Start the engine and check for leaks
igl
Recheck the
coolant level and refill as necessary.
