www.toyorobot.com
27
4)
For three-piece-clamp-on type of
gear, before assemble the gear
onto the motor, make sure the gap
for inner wheel matches the gap
from the two clamp-on-piece.
5)
Make sure once the gear is
installed on the motor, there is a
small gap between gear and motor.
6)
The picture on the right is a bad
example as there is no gap between
gear and the motor.
7)
Tighten the two screws to fix the
position of the gear.
8)
Install the motor and gear onto
the unit. Make sure there are
spring washers installed on
screws, and also the position of
the power outlet of the motor meet
the requirement.
