www.toyorobot.com
23
4)
Before assemble the gear onto the
motor, make sure the gap for
inner wheel matches the gap from
the two clamp-on-piece.
5)
Make sure once the gear is
installed on the motor, there is
a small gap between gear and
motor.
6)
The picture on the right is a bad
example as there is no gap
between gear and the motor.
7)
Install the motor with gears onto
the unit with the position fixing
plates in between, and make sure
there are spring washers
installed on screws. As belt
tension adjustment is required,
please do not tighten the screws
yet.
8)
Insert the belt on the gear which
drives the ball screw first. It
is usually firstly insert the
belt into the gear with the side
grip.
