www.toyorobot.com
20
enough mounting holes for screws.
4-3 Driver motor assembly
All assembly shall be done by qualified and experienced technician.
Make sure the power has been turned OFF from power source.
Assembled model: ETH5
、
ETH6
Ball screw type actuator with direct driven externally assembled motor (BC)
NO
Explanation
Explanation with pictures
1)
Remove the 4 screws on the
coupling cover.
2)
Loose the motor tightening screw
on the coupling.
In case the coupling is not
included, please install one
after removal of the coupling
cover.
3)
Assemble the motor onto the
actuator.
