- 4 -
tousek
/ EN_PULL-TSA_03 / 25. 03. 2020
Features of PULL TSA
• Programmable via four buttons and 7-segment display
or optionally via LC-Display (2 x 16 characters)
• Three selectable operating modes (impulse, automatic
and dead man)
• Event memory oft he last 800 cycles
• 1m partial opening for pedestrians (can also be operated
via radio)
• Built in control board in separate housing
• Self-learning end positions
• Permanently selflearning force
• Safety system ARS (automatic reversal system)
• Direct connection of 8,2 kΩ safety sensing edges
separated for main and side edge
• Adjustable soft stop
• Integrated radio receiver RS 868
• Up to 48 transmitters can be programmed
• Memory oft the radio receiver manageable from the display
• Optional releasing system with standard half cylinder
• Gearbox unit in oil bath
• Worm gear and worm wheel made of tempered steel
•
1. General
Sliding gate opener PULL TSA
Technical data
Schiebetorantrieb PULL TSA - Set
Control board
integrated
Max. drive
30m
Power supply
230Va.c. 50Hz
Duty cycle in
S3 mode
20 cyles/day
max. current consumption (excl. equipment)
1,3A
Ambient temperature
-20° bis +40°C
Gear wheel
Z20M4
Protection class
IP44
Max. gate weight
400kg
torque sensor
Speed
11m/min
Article code
61001
Torque
15Nm
Kit accessories
1 motor PULL TSA with integrated receiver RS 868, 2-channel • 2 transmitters RS 868-4M,
4-channel • 1 photocell LS 180
Optional equipment
Programming display incl. 20cm cable • half profile cylinder with 3 keys
General
While developing the new operator generation Tousek PULL TSA special attention has been paid to a quick and simple instal-
lation and a troublefree operation, together with the proven quality and reliability. Accordingly, many clever details have been
built into the operator - from the automatic learning of gate end positions, to the control board with removable clamps, which
make it particularly user-friendly. The drive unit itself consists of an electric motor and a worm gearing, accommodated in a
robust aluminium housing, and - together with the integrated microprocessor control incl. 2-ch. Radio receiver RS 868 and the
safety reverse system ARS - forms a compact device with small overall dimensions.
The safety reverse system ARS senses obstacles during opening and closing of the gate and permits a continuous adjustment of
the drive force. Following the Tousek tradition, all operator components have been built in a particularly robust and resistant way to
guarantee the safe and reliable operation even in the most adverse weather conditions.
Additional improvements are for example:, the separate control board housing, which double protects this sensible part, or the oil
bath, which ensures that the motor/gearing components move in an optimal way in all temperatures with perfect lubrication and
cooling effect. You can install the PULL TSA on new or already exsting sliding gates in a simple and fast way.
optional programming display incl.
20cm cabel
(art.code 12111250)
