- 22 -
tousek
/ EN_PULL-TSA_03 / 25. 03. 2020
8. Troubleshooting guide
Sliding gate opener PULL TSA
Display / error
Meaning
Solution
F 0
stop switch triggered
with the next impulse the gate moves
in the same or in the opposite direc-
tion.
(see Stop button)
if there is no stop switch, no bridge places
between terminal pair „STOP“.
place a bridge between terminals
30/31.
F 1
photocell interrupted
if there is no visible interruption of the
photocells, the reason could be the
soiling. Check function and adjustment
of the photocells.
no photocell connected but still active in
menu item P3
deactivate the photocell in P3
F 2
main safety sensing edge interrupted or
short circuited
check the correct functioning or remo-
ve the obstacle.
F 3
side safety sensing edge interrupted or
short circuited
check the correct functioning or remo-
ve the obstacle.
F 4
sensor error, gate has bumped into an
obstacle or is difficult to move
check the force settings, remove the
obstacle / check gate smooth opera-
tion.
F 5
a safety device or an impulse button has
been triggere while detecting the end
positions.
give another impulse
F 7
receiver memory full
the integrated receiver can manage
max. 48 remote controls
F 8
runtime error
i.e. motor released > lock the motor
F 9
sensor error (offline)
check sensor connection
No reaction when giving an
impulse
no line voltage hence
safety fuse broken
check line voltage as well as safety
fuses
error in the transmitter/control device/im-
pulse button
e.g. transmitter not programmed
check transmitter/control device,
e.g. program transmitter and
check the battery
Control relays are switching but no
gate movement
motor released
lock motor gearing
