- 10 -
tousek
/ EN_PULL-TSA_03 / 25. 03. 2020
The selectable parameters of the menu items
P o
to
P
are marked in the table below as follows:
= selectable settings (value assignment possible)
= factory settings
Programming buttons
Adjustmets-overview
3.2 Adjustments - overview
Sliding gate opener PULL TSA
• Before programming please remove the motor cover.
• Die Anzeige (either 7Segment-
(7S)
or optional, external
display) informs you about operating status, chosen menus
and the adjustment of various parameters.
• The programming of the control is carried out with the help
of four buttons
(
+, -
,
(=Enter)
and
(=Escape).
• Scrolling through the available menu points (up/
down) or the adjustment of a parameter (value in-
crease/decrease) is carried out with b and –.
AUTO-COUNT:
when holding one of the buttons the value
changes automatically.
• When pressing the
-
button a confirmation for entering
the shown menu point, resp. for accepting the shown value
of a parameter is given.
• When pressing the
-
button you return to the superior menu point. Possibly changed adjustments of a parameter
are rejected with this button (the former values remain valid).
•
AUTO-EXIT:
if no button is pressed within1 min., the menu switches automatically to the modus “ready for operation”
(without saving the changed parameters).
Alternatively to the programming of the motor via standard control panel, consisting of 4 programming buttons
and a 7-segment display
(7S),
you can also connect the optional text display to the control unit (connector
(D)
).
The indications are given in written form and this thereby facilitate the operation.
7S
If the optional clear text display is connected, the programming buttons of the default panel are out of
operation!
