Toto NEOREST, Instruction Manual, Page: 4 / 34

6 7
Introduction
WARNING
This is an electrical product. Do not install it anywhere water is likely to get on
the product or anywhere with humidity high enough that water is likely to form
on the surface of this product. When using the product in a bathroom, install a
fan or ventilation port and ensure good air fl ow through the bathroom.
Failure to do so could cause a fi re or electrical shock.
x
If the electric cord is damaged, avoid danger by having the manufacturer’s
repair department or equivalent specialist replace it.
[North, Central, South America]
Insert the power plug securely into the outlet.
Failure to do so could cause a fi re, heat or a short.
x
Periodically remove dust and dirt from the electrical plug and make sure
it is securely plugged into the wall outlet.
Failure to do so could cause a fi re, heat or a short.
x
Pull the plug out from the outlet and wipe clean with a dry cloth.
Always unplug the plug from the outlet before cleaning or maintenance.
Failure to do so may cause electrical shock.
x
Except when using "Wand cleaning" or "Bowl unit cleaning".
x
Always unplug the plug from the outlet before removing the top unit.
Failure to do so could cause a fi re or electrical shock.
x
[Asia, Oceania, Middle East]
Check that the power plug is waterproofed with silicone rubber.
A power plug that is not water-proofed could cause a fi re and electrical shock.
x
* If the power plug is not water-proofed, ask the contractor who did the installation to water-proof it.
Check that an appropriate ground is installed.
If the ground is not installed, if there is a breakdown or electrical current leak, the lack of a
x
ground could cause electrical shock.
For the ground, use copper wire with a ground resistance of 100
:
max. and a diameter of
0.005 ft (1.6 mm) min.
* If there is no ground installed, ask the contractor who did the installation to install the ground.
Check that the outlet for electrical power is as follows.
Failure to do so could cause a fi re or electrical shock.
x
a. Protect the outlet circuits with a high-sensitivity quick leakage switch (with a rated current
sensitivity of 15mA or less) or an insulating transformer (1.5kVA min., 3kVA max.).
b. Install the outlet and plug positioned at least 2.62 ft (0.8 m) above the fl oor and as far as
possible from the bathtub.
* Check that the wiring in a. and b. above is complete. If the wiring has not been completed,
ask the contractor who did the installation to do it.
Always switch the breaker on the distribution board to OFF before
cleaning or maintenance.
Doing so may cause electrical shock.
x
Except when using "Wand cleaning" or "Bowl unit cleaning".
x
Always switch the breaker on the distribution board to OFF before
removing the top unit.
Failure to do so could cause a fi re or electrical shock.
x
CAUTION
Keep cigarettes and other open fl ames away from this product.
Failure to do so could cause a fi re.
x
When cleaning or maintaining the plastic parts (top unit etc.) or the water
supply hose, use a kitchen cleaner diluted with water. Do not use any of the
following.
Toilet cleaner, household cleaner, benzene, paint thinner, powdered cleanser or nylon scrubbing
pads.
These items could damage or crack the plastic and cause injury or malfunction.
x
These items could damage the water supply hose and cause a water leak.
x
Do not apply strong force, mechanical shock, step on or stand on the toilet
seat, toilet lid or top unit. Also do not place any heavy object on the toilet
seat, toilet lid or top unit.
Doing so could cause cracking or cause the top unit to come loose and fall resulting in injury.
x
Doing so could damage the product and cause injury or water damage.
x
Do not lift up this product by the toilet seat or lid.
Do not raise the toilet seat or lid while objects are resting on top of the toilet.
Doing so could cause the top unit to come loose and fall resulting in injury.
x
Do not fold or crush the water supply hose.
Doing so could cause water leaks.
x
To prevent a sudden water leak, do not remove the water fi lter drain valve
when the water supply valve is open.
Doing so will cause water to spurt out.
x
Refer to Page 32 for instructions on cleaning the water fi lter drain valve.
Do not fl ush anything other than bodily waste and toilet paper. Also, do not
fl ush too much toilet paper.
Doing so could clog the toilet, causing waste water overfl ow and water damage.
x
Do not pour hot water into the toilet.
Doing so may result in damage to the toilet, injury or water damage.
x
If the product is damaged, do not touch the damaged section.
Doing so could cause injury.
x
When operating the lift lever for cleaning, do not insert your fi ngers into the
gap between the top unit and the bowl unit.
Do not use the product while the top unit is lifted up.
Do not use the product if the top unit is unstable.
Doing so could cause the top unit to come loose and fall, resulting in injury.
x
Safety Precautions
(Continued)