Toto NEOREST, Instruction Manual, Page: 25 / 34

48 49
Reference
Changing Settings
LIGHT
Set whether or not to use the
soft light
SOFT LIGHT
1
Hold down [STOP], for about 10
seconds, until the entire display
panel on the backside of the remote
control
À
ashes.
2
Press [DRYER].
3
Press [STOP].
<Settings complete>
Set whether or not to use the
light inside the bowl unit
BOWL LIGHT
1
Hold down [STOP], for about 10
seconds, until the entire display panel
on the backside of the remote control
À
ashes.
2
Press [PRESSURE – ] and
[POSITION
▼
] at the same
time.
3
Press [STOP].
<Settings complete>
Set whether or not to light up the
CLEAN indicator
INDICATOR
1
Hold down [STOP], for about 10
seconds, until the entire display panel
on the backside of the remote control
À
ashes.
2
Press [REAR CLEANSING]
and [FRONT CLEANSING]
at the same time.
3
Press [STOP].
<Settings complete>
[STOP]
[REAR CLEANSING]
[FRONT CLEANSING]
[DRYER]
[PRESSURE ]
[POSITION
▼
]
The setting changes each time the
button is pressed
For setting to "use"
■
You will hear one short beep.
For setting to "do not use"
■
You will hear one long beep.
The setting changes each time the
button is pressed
For setting to "use"
■
You will hear one short beep.
For setting to "do not use"
■
You will hear one long beep.
The setting changes each time the
button is pressed
For setting to "light up"
■
You will hear one short beep.
For setting to "do not light
■
up"
You will hear one long beep.