Toto NEOREST, Instruction Manual, Page: 16 / 34

30 31
Maintenance
Maintenance
Gap between the Top Unit and Bowl Unit
Gap between the Top Unit and Toilet Lid
Gap between the Top Unit and Bowl Unit
(Perform monthly)
You can lift up the top unit with the cleaning lift
lever and clean the gap between it and the bowl
unit.
Soft cloth soaked in water Toilet paper, etc.
(May cause damage)
1
[North, Central, South America]
Unplug the power plug.
[Asia, Oceania, Middle East]
Switch the breaker on the distribution board to OFF.
2
Open the toilet seat and lid.
Cleaning
lift lever
3
Pull the cleaning lift lever until you
cannot pull it out any more, then
turn it downward.
(This raises the front side of the top unit about 0.08 ft
(about 25 mm))
4
Clean the gap.
Wipe with a soft cloth soaked in a diluted,
•
neutral kitchen detergent. Then, wipe it with a
soft cloth soaked in water so that no detergent
remains.
5
Pull the cleaning lift lever until you
cannot pull it out any more, then
turn it upward.
CAUTION
When operating the cleaning
lift lever
Do not put a fi nger between the top unit
and bowl unit.
Do not use the product while the top
unit is lifted up.
Attention!
Do not directly spray cleaner and water.
●
Do not force the cleaning lift lever.
●
Do not force the toilet seat or lid to move
●
while the top unit is raised up.
6
[North, Central, South America]
Insert the power plug.
[Asia, Oceania, Middle East]
Switch the breaker on the distribution board to ON.
3
Maintenance
Between the top unit and the toilet lid
(Perform monthly)
The toilet lid can be removed for thorough
cleaning.
Soft cloth soaked in water Toilet paper, etc.
(May cause damage)
1
[North, Central, South America]
Unplug the power plug.
[Asia, Oceania, Middle East]
Switch the breaker on the
distribution board to OFF.
(May cause damage)
Removing and Reinstalling
A
B
C
D
Use the
appropriate
angle.
Vertically
When the toilet lid pins come loose.
■
Insert
Toilet lid pin
Hold with
both hands
2
Remove the toilet lid.
Pull straight up strongly in the following
order show in the diagram to the right:
➞
.
3
Wipe with a soft cloth that has
been soaked in water and then
wrung out thoroughly.
4
Reinstall the toilet lid.
Insert the toilet lid pins in the following
order show in the diagram to the right:
➞
.
* Do not insert the pins at a slant or using
excessive force.
5
[North, Central, South America]
Insert the power plug.
[Asia, Oceania, Middle East]
Switch the breaker on the
distribution board to ON.
6
Open and close the toilet lid to
check the reinstallation.