Toshiba ZL1* Digital Series Manual Download

Page: 10 / 108

INSTALLING YOUR TV

glis

Speaker / Pedestal Assembly

Attach the speaker and pedestal stand.

WARNING:

To prevent possible electric shock, protect

the power cord from being pinched when attaching
the pedestal stand.

CAUTION:

Before beginning pedestal assembly,

carefully lay the front of the LCD Panel face down on a
flat, cushioned surface such as a quilt or blanket. Leave
the bottom of the unit protruding over the edge of the
surface and assemble as indicated.

NOTE:

• Extreme care should always be used when attaching

the pedestal stand to avoid damage to the LCD panel.

• Two or more people are required for installation. When lifting the TV, do not hold the speaker to avoid damage to the speaker.

Check that all the following accessories are provided.

Speaker/Screws

: Bracket for Speaker support/Screws

: Bracket and Cover for Wall mounting/Screw

: Pedestal components

14 mm

8 mm

20 mm

14 mm

Summary of Contents for ZL1* Digital Series













































































































Search results

Summary of Contents for ZL1* Digital Series

Reviews:

Related manuals for ZL1* Digital Series

Brands by name

Popular brands

Toshiba ZL1* Digital Series, Manual

Search results

Summary of Contents for ZL1* Digital Series

Reviews:

Related manuals for ZL1* Digital Series

Brands by name

Popular brands