Toshiba ZL1* Digital Series, Manual

Page: 45 / 108

45
CONTROLS AND FEATURES
Engl
ish
When LED Backlight Control is set to On , you can adjust the
brightness of the white areas.
a
In the Advanced Picture Settings menu, press
B
or
b
to select Peak Brightness Adjustment .
b
Press
C
or
c
to select Off , Low , Middle , High , or
Auto .
Black/White Level increases the strength of dark areas of the
picture to improve the definition.
a
In the Advanced Picture Settings menu, press
B
or
b
to select Black/White Level .
b
Press
C
or
c
to adjust the level. The effect depends on
the broadcast and is most noticeable on dark colours.
The static gamma feature allows you to adjust the levels of black
in the picture.
a
In the Advanced Picture Settings menu, press
B
or
b
to select Static Gamma .
b
Press
C
or
c
to adjust the level.
When watching a DVD, the compression may cause some words
or picture elements to become distorted or pi x elated.
Using the MPEG NR feature reduces this effect by smoothing out
the edges.
a
In the Advanced Picture Settings menu, press
B
or
b
to select Noise Reduction and press OK .
b
Press
b
to select MPEG NR .
c
Press
C
or
c
to select Low , Middle , High or Off to suit
your preference.
DNR allows you to “soften” the screen representation of a weak
signal to reduce the noise effect.
a
Select DNR from the Noise Reduction menu.
b
Press
C
or
c
to select Low , Middle , High , Auto or Off .
The differences may not always be noticeable (for the
best result use lower settings as picture quality can be
lost if the setting is too high).
The Res feature allows you to adjust the clarity levels
for your desired picture settings.
a
In the Advanced Picture Settings menu, press
B
or
b
to select Res and press OK .
b
In the Res field, select Auto .
c
Press
B
or
b
to highlight Level and press
C
or
c
to
adjust the level.
NOTE:
• This feature may not work properly depending on the
content.
• Adjustable range varies according to the Picture Mode you
set.
• Noise may appear in the picture depending on the device
connected to the TV (e.g. a device with a specific enhancer
function).
This feature will reduce picture blur without decreasing image
brightness or adding flicker.
a
In the Advanced Picture Settings menu, press
B
or
b
to select Active Vision M800 .
b
Press
C
or
c
to select Smooth , Standard or Off .
NOTE: When Picture Mode is set to Game , this feature will be
grayed out and automatically set to Off .
Peak Brightness Adjustment
Black/White Level
Static Gamma
MPEG NR – Noise Reduction
Noise Reduction
DNR
MPEG NR Low
Auto
DNR – Digital Noise Reduction
Res
Active Vision M800
Res
Level
Res
Auto
3