Toshiba ZL1* Digital Series Manual Download | Manualshive

Page: 16 / 108

background image

16

CONNECTING YOUR TV

En

glis

h

Connecting an HDMI® or DVI
device to the HDMI input

The HDMI input on your television receives digital
audio and uncompressed digital video from an
HDMI source device or uncompressed digital
video from a DVI (Digital Visual Interface) source
device.

This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) programme material in digital
form from EIA/CEA-861-D–compliant consumer electronic
devices (such as a set-top box or DVD player with HDMI or DVI
output). For acceptable video signal formats, see page 104.

NOTE:

• Some early HDMI equipment may not work properly with

your latest HDMI TV, due to the adoption of a new standard.
Please unplug your HDMI cable first and then try setting the

INSTAPORT™

and

Enable Content Type

options to “

Off

”.

Your early HDMI source should operate properly with your
television. See page 91.

• Supported Audio format: Linear PCM, Dolby Digital (AC-3),

sampling rate 32/44.1/48kHz.

Connect an HDMI cable (type A connector) to the HDMI
terminal.

For proper operation, it is recommended that you use an
HDMI cable with the HDMI Logo (

).

• If your HDMI connection is capable of 1080p and/or your

television is capable of refresh rates greater than 50Hz, you
will need a Category 2 cable. Conventional HDMI/DVI cable
may not work properly with this model.

• HDMI cable transfers both video and audio. Separate

analogue audio cables are not required (see illustration).

• See “HDMI 3 Audio” section on page 90.

To view the HDMI device video, press the

o

button to select

HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode.

Connect an HDMI-to-DVI adaptor cable (HDMI type A
connector) to the HDMI 3 terminal and audio cables to the PC/
HDMI 3 (AUDIO) socket (see illustration).

• The recommended HDMI-to-DVI adaptor cable length is

6.6 ft (2m).

• An HDMI-to-DVI adaptor cable transfers video only.

Separate analogue audio cables are required.

• See “HDMI 3 Audio” section on page 90.

NOTE:

To ensure that the HDMI or DVI device is reset properly, it is
recommended that you follow these procedures:

• When turning on your electronic components, turn on the

television first, and then the HDMI or DVI device.

• When turning off your electronic components, turn off the

HDMI or DVI device first, and then the television.

This feature enables the audio signal of the TV to be sent to
the AV amplifier via the HDMI cable. It will not be necessary to
connect a cable from the audio output of the TV to the audio
input of the AV amplifier to reproduce the audio received
from the tuner of the TV through the AV amplifier.

To connect an HDMI device

the back of your television

HDMI device

HDMI cable

To connect a DVI device

HDMI’s ARC (Audio Return Channel)

feature

Audio cable for HDMI to television

connection (not supplied)

HDMI-to- DVI
adaptor Cable

DVI device

the back of your television

the back of your television

AV amplifier that supports ARC

HDMI cable

«
...
14
15
16
17
18
...
»

Summary of Contents for ZL1* Digital Series













































































































Reviews:

No comments

Related manuals for ZL1* Digital Series

Brand: Daewoo Pages: 16

Brand: Daewoo Pages: 54

Brand: HANNspree Pages: 2

Brand: oCOSMO Pages: 6

Brand: oCOSMO Pages: 2

Brand: Samsung Pages: 65

Brand: Curtis Pages: 1

Brand: TCL Pages: 26

Brand: EQD Pages: 27

Brand: ZKTeco Pages: 9

Brand: PURPOSEAV Pages: 5

Brand: Disgo Pages: 11

Brand: TEC Pages: 40

Brand: Saba Pages: 13

Brand: Vizio Pages: 72

SMART MOUNT SF 16D

Brand: PEERLESS Pages: 9

Brand: Konig Pages: 12

Brand: Panasonic Pages: 30

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands