Toshiba ZL1* Digital Series Manual Download

Page: 15 / 108

CONNECTING YOUR TV

Engl

ish

Mount the USB HDD Holder on the back of the TV by
securing 4 screws.

Set the USB HDD into the USB HDD Holder, close the
cover until it clicks.

Connect the USB cable.

NOTE:

• To disconnect a USB HDD from the TV, follow the

procedures for “To disconnect a USB HDD” section
(page 64).

• Connect the USB HDD to the USB 2 port. Recording and

playback cannot be performed if connected to the USB 1
port.

• Recorded programs saved on the USB HDD can only be

viewed on this TV. They cannot be viewed when connected
to another TV (including the same model of TV), a PC, or
other device.

• If a USB HDD is re-registered, it will not be formatted.

• When the USB HDD is formatted, all the data stored on the

HDD will be deleted.

To connect the supplied USB HDD

Back of the TV

USB HDD Holder

USB HDD

“Click”

USB Cable

To USB2

Summary of Contents for ZL1* Digital Series













































































































Search results

Summary of Contents for ZL1* Digital Series

Reviews:

Related manuals for ZL1* Digital Series

Brands by name

Popular brands

Toshiba ZL1* Digital Series, Manual

Search results

Summary of Contents for ZL1* Digital Series

Reviews:

Related manuals for ZL1* Digital Series

Brands by name

Popular brands