Toshiba TDP-MT5, Service Manual

Page: 7 / 108

TDP-S3/TDP-T3/TDP-MT5 Service Manual 7
The TDP-T3
Introducing the TDP-T3, TDP-S3
and TDP-MT5
The TDP-T3, the TDP-S3 and the TDP-MT5 projectors use DLP (digital light processing) technology from
Texas Instruments.
The TDP-T3 has a native XGA resolution (1,064 x 768 pixels), while the TDP-S3 has a native SVGA
resolution (800 x 600 pixels). Both the T3 and S3 have 2000 lumens (or 1600 in conservation mode). The
TDP-MT5 is optimized for video reproduction with
848 x 480 (16:9) and 800 x 600 (4:3) resolutions.
While it has fewer lumens (1000) than the other two
projectors, it has a higher contrast ratio and better
color saturation.
Below is a table that shows the replacement part
differences among the projectors.
Part TDP-T3 part number TDP-S3 part number TDP-MT5 part number
Controller ECA
510-1530-xx 510-1579-xx 510-1575-xx
Optical Engine
505-1180-xx 505-1181-xx 505-1173-xx
Front bezel
505-0976-xx 505-0976-xx 505-1193-xx
Front bezel vent
505-0969-xx 505-0969-xx 505-1195-xx
Lamp door
505-0978-xx 505-0978-xx 505-1196-xx
Rear bezel
505-0966-xx 505-0966-xx 505-1129-xx
Bottom case
505-0970-xx 505-0970-xx
505-1191-xx
Top case
505-0982-xx 505-0982-xx 505-1188-xx
Toshiba nameplate
505-1060-xx 505-1060-xx 505-1197-xx
Label, Certification
020-1165-xx 020-1271-xx 020-1350-xx
Power supply
insulator
329-0268-xx 329-0268-xx 329-0321-xx
Top I/O EMI gasket N/A N/A
505-1191-xx
I/O EMI shield
gasket
N/A N/A
329-0343-xx