22
u
High Wall Type
• Open the air inlet grille. Lift the air inlet grille up to the horizontal position.
• Take hold of the left and right handles of the air filter and lift it up slightly, then pull downward to take it out
from the filter holder.
Filter holder
Filter holder
Return the air filter
• Insert the upper portion of air filter confirming to fit it is right and left edges on the indoor unit until it is firmly set.
• Close the air inlet grille.
Cleaning the air inlet grille
1. Remove the air inlet grille.
Hold the two sides of the air inlet grille and open upwards.
Move the center arm to the left and remove the grille.
2. Wash it with water using a soft sponge or towel.
(Do not use metallic scrubbing brush or other hard brushes.)
• Use of such hard objects will cause scratches on the surface of
the grille, and the metal coating to peel off.
• If very dirty, clean the air inlet grille with a neutral detergent for
kitchen use, and rinse it off with water.
3. Wipe out water from the air inlet grille and dry it.
4. Fit the left and right arms of the air inlet grille to the shafts on the
two sides of the air conditioner and push in completely, and then
push in the center arm.
5. Check that the center arm has been completely inserted and
close the air inlet grille.
• Push the arrow locations (Four) at the bottom of the air inlet
grille to check whether the grill is completely closed.
NOTE
Cleaning of air filter
• For cleaning of air filter, use a cleaner or brush clean.
If stain is heavy, it is effective to wash the air filter in tepid water mixed
with neutral detergent.
• After washing, rinse it well, and dry it in the shade.
• Install again the air filter which has been cleaned.
FILE NO. SVM-1
40
77
