Home Automation Interface
Configuring Lighting
262
2
Select the Configuration sub-menu item and then click the
Lighting
configuration
option.
The Lighting Configuration page appears, which lists all lights currently configured
(this list is blank until you enter devices).
3
Click
Add Lighting Devices
to add a new light.
The Add a Lighting Device screen appears, which allows you to enter information
about a new lighting device.
4
By completing the applicable information on this screen, you can tell the Magnia
SG20 about a lighting device configured in your home automation controller. This
includes:
❖
Name of device:
Enter any name that will help you identify the light later.
Examples might be Desk lamp or Standing Lamp.
❖
Type:
The type of device, generally X10 or Extended X10.
❖
X10 Address:
This is an address that is derived from the house code and unit
code of the X10 device. For example, if the device’s house code was “A”, and the
unit code was “4”, its address in the Magnia SG20 will be A4.
❖
Location:
Select a location from the drop down list. Before you enter the first
device, this list is empty. After you enter locations, you can select from these
locations in the drop-down, or enter new locations by clicking on the “New