4
Type of service
Your modem is designed to be used on standard-device telephone lines. Connection to telephone company-provided
coin service (central office implemented systems) is prohibited. Connection to party lines service is subject to State
tariffs. If you have any questions about your telephone line, such as how many pieces of equipment you can connect to
it, the telephone company will provide this information upon request.
Telephone Company Procedures
The goal of the telephone company is to provide you with the best service it can. In order to do this, it may occasionally
be necessary for them to make changes in their equipment, operations or procedures. If these changes might affect
your service or the operation of your equipment, the telephone company will give you notice, in writing, to allow you to
make any changes necessary to maintain uninterrupted service.
If Problems Arise
If any of your telephone equipment is not operating properly, you should immediately remove it from your telephone
line, as it may cause harm to the telephone network. If the telephone company notes a problem, they may temporarily
discontinue service. When practical, they will notify you in advance of this disconnection. If advance notice is not
feasible, you will be notified as soon as possible. When you are notified, you will be given the opportunity to correct the
problem and informed of your right to file a complaint with the FCC. In the event repairs are ever needed on your
modem, they should be performed by Toshiba America Information Systems, Inc. or an authorized representative of
Toshiba America Information Systems, Inc.
Disconnection
If you should ever decide to permanently disconnect your modem from its present line, please call the telephone
company and let them know of this change.
Fax Branding
The Telephone Consumer Protection Act of 1991 makes it unlawful to use a computer or other electronic device to
send any message via a telephone fax machine unless such message clearly contains in a margin at the top or bottom
of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the
business, other entity or individual sending the message and the telephone number of the sending machine or such
business, other entity or individual.
In order to program this information into your fax modem, you should complete the setup for your fax software before sending a
message.
Special Instructions for a Field Representative
This product may be partially assembled by another manufacturer covered in Volume 1 of the Follow-Up Service
Procedures with the exception of specific components.
The final assembly manufacturer’s Field Representative shall verify that sub-assembly products shipped from the
manufacturing plant are delivered in a carton bearing one 6mm blue dot as the identification marking.
Detailed inspection of sub-assemblies is performed at the manufacturing plant of the basic List and is not required
during final assembly as described in Volume 1.
In case of non-compliance, as described in Volume 1, the manufacturer shall be instructed in writing to remove UL
Listing Marks from each unit, or to hold the shipment pending appeal to a Reviewing Office.
