Toshiba SD-2300 Service Manual Download Page 93

Page: 93 / 160

1-2-4. Front PC Board

Note:

• The flexible cable of the game port PC board may be

connected to the main PC board. (Refer to Fig. 2-1-9.)

1. Remove the front panel. (Refer to item 1-1-4.)

2. Remove two flexible cables (1).

3. Remove four screws (2) and remove the front display

PC board (3)

4. Remove three screws (4) and remove the PC Game

port PC board (5).

5. Remove two screws (6) and remove the power switch

PC board (7).

Fig. 2-1-13

Screws (6)

Screws (4)

Power SW
PC board (7)

Flexible
cable (1)

Front display
PC board (3)

PC Game port
PC board (5)

Screws (2)

Flexible
cable (1)

1-3. Mechanism Parts

1-3-1. Mechanism Chassis Assembly

Note:

• When removing the mechanism chassis assembly (3),

be sure to short-circuit the laser diode output land

before removing the connector and the flexible cables.

After replacing, open the land as it was after inserting

the connector and flexible cables.

1. Remove the tray. (Refer to items 1-1-3 and 1-1-4.)

2. Remove three flexible cables (1).

3. Remove four screws (2) and remove the mechanism

chassis assembly (3).

Fig. 2-1-14

Flexible cables (1)

Screws (2)

Mechanism
chassis assembly (3)

Pickup head

Laser diode
output lands

Summary of Contents for SD-2300

































































































































































Search results

Summary of Contents for SD-2300

Reviews:

Related manuals for SD-2300

Brands by name

Popular brands

Toshiba SD-2300, Service Manual

Search results

Summary of Contents for SD-2300

Reviews:

Related manuals for SD-2300

Brands by name

Popular brands