Toshiba SD-2300 Service Manual Download Page 32

Page: 32 / 160

Basic playback

Playing a Disc (continued)

You can play discs at various speeds, and resume playback from the location
where you stopped playback.

Playing in fast reverse or fast forward directions

Playing frame by frame

Press PAUSE/STEP during still playback.

Each time you press the PAUSE/
STEP button, the picture advances
one frame.

To resume normal playback

Press PLAY.

Note
The sound is muted during frame by frame playback.

DVD

PAUSE/STEP

PLAY

PAUSE/STEP

STOP

SLOW

PLAY

FWD

REV

Press REV or FWD during playback.

REV: Fast reverse playback
FWD: Fast forward playback

Each time you press the REV or
FWD button, the playback speed
changes.

To resume normal playback

Press PLAY.

Notes
• The DVD video player mutes sound and omits subtitles

during reverse and forward scan of DVD video discs.
However, it plays sound in the following cases:
– forward scan (

displayed) of DVD video discs.

– fast forward or fast reverse play of audio CDs.

• The playback speed may differ depending on the disc.

REV

FWD

PLAY

Summary of Contents for SD-2300

































































































































































Search results

Summary of Contents for SD-2300

Reviews:

Related manuals for SD-2300

Brands by name

Popular brands

Toshiba SD-2300, Service Manual

Search results

Summary of Contents for SD-2300

Reviews:

Related manuals for SD-2300

Brands by name

Popular brands