Toshiba SD-2300 Service Manual Download Page 91

Page: 91 / 160

1-2. PC Board Replacement

Note:

• The flexible cable of the game port PC board may be

connected to the front PC board or to the main PC

board.

When connecting to the main PC board, refer to the

followings for wiring.

Fig. 2-1-9

1-2-1. Main PC Board

Note:

• Before removing the main PC board (4), be sure to

short-circuit the laser diode output land.

After replacing, open the land as it was after inserting

the flexible cables (1).

• The game port PC board and the main PC board may

be connected. (Refer to Fig. 2-1-9.)

1. Remove the top cover. (Refer to item 1-1-1.)

2. Remove seven flexible cables (1) and remove one

connector (2).

3. Remove four screws (3).

4. Release two claws and remove the main PC board (4).

Note:

• When mounting, be sure to twist the wire for the

connector (2) several times.

Fig. 2-1-10

Ferrite
core

Main
PC board

Ferrite
core

Both sides
adhesive tape

Game port
PC board

Flexible
cable

Aluminium tape
(80mm)

Flexible
cable

Aluminium tape
(50mm)

Flexible
cable

Bend
here

Game port
PC board

Flexible
cables (1)

Screws (3)

Main PC board (4)

Claws

Connector (2)

Twist more than 7 times.

Pickup head

Laser diode
output lands

Summary of Contents for SD-2300

































































































































































Search results

Summary of Contents for SD-2300

Reviews:

Related manuals for SD-2300

Brands by name

Popular brands

Toshiba SD-2300, Service Manual

Search results

Summary of Contents for SD-2300

Reviews:

Related manuals for SD-2300

Brands by name

Popular brands