Toshiba SD-2300 Service Manual Download Page 39

Page: 39 / 160

Advanced playback

Playing Repeatedly

You can play a specific title, chapter, track, or segment repeatedly.

Repeating a title, chapter, or track

Press REPEAT.

Each time you press the REPEAT
button, the repeat mode changes as
follows.

Chapter Repeat

Title Repeat

Track Repeat

All Repeat

Repeat Off

Repeats the current
chapter.

Repeats the current
title.
Repeats the current
track.

Repeats the entire
disc.

Resumes normal
playback.

To resume normal playback

Press CLEAR.

Note
Some discs may not permit repeat operation.

Repeating a specific segment

Press A-B RPT at the beginning of the
segment (point A) you want to play
repeatedly.

Press A-B RPT again at the end of the
segment (point B).

The DVD video player automatically
returns to point A and starts repeat
playback of the selected segment
(A-B).

To resume normal playback

Press CLEAR.

Notes
• Some discs may not permit A-B repeat operation.
• You cannot set the A-B repeat function for a segment that

includes multiple camera angles

• You can specify a segment only within the current title.
• There may be a slight difference between point A and the

location where playback actually resumes depending on the
disc.

Press PLAY.

The DVD video player starts repeat
playback.
Press the PLAY button within about
5 seconds after you press the
REPEAT button.

PLAY

CLEAR

A-B RPT

REPEAT

DVD

REPEAT

Chapter Repeat

DVD

PLAY

CLEAR

DVD

A-B RPT

A–

A-B RPT

A–B

CLEAR

Summary of Contents for SD-2300

































































































































































Search results

Summary of Contents for SD-2300

Reviews:

Brands by name

Popular brands

Toshiba SD-2300, Service Manual

Search results

Summary of Contents for SD-2300

Reviews:

Brands by name

Popular brands