Toshiba Satellite Pro 400CDT User Manual Download Page 66

Page: 66 / 202

400 Series

3-17

Subtest 06

640x200 Graphics Display (mode 6, E)

This subtest displays even dots, odd dots, and all dots in the 640x200 dot
graphics mode 6 and E as shown below:

To exit this subtest and return to the DISPLAY TEST menu, press

Ctrl +

Break.

Subtest 07

640x350/480 Graphics Display (mode 10, 74, 12)

This subtest displays even dots, odd dots, and all dots in the 640x350 and
640x480 dot graphics mode 10, 74, 12 as shown below:

Pressing

Enter

changes the size of the displayed image. To exit this subtest

and return to the DISPLAY TEST menu, press

Ctrl + Break.

Summary of Contents for Satellite Pro 400CDT











































































































































































































Search results

Summary of Contents for Satellite Pro 400CDT

Reviews:

Related manuals for Satellite Pro 400CDT

Brands by name

Popular brands

Toshiba Satellite Pro 400CDT, User Manual

Search results

Summary of Contents for Satellite Pro 400CDT

Reviews:

Related manuals for Satellite Pro 400CDT

Brands by name

Popular brands