manualshive.com logo in svg

Toshiba Satellite Pro 400CDT, User Manual

The Toshiba Satellite Pro 400CDT Specification Sheet is an essential manual for users seeking detailed information on this impressive laptop. Easily accessible for free download from manualshive.com, this comprehensive manual offers valuable insights into the features, specifications, and functionalities of the Toshiba Satellite Pro 400CDT.

Share
Download
background image

400 Series

2-19

2.6

Hard Disk Drive Troubleshooting

To determine if the hard disk drive is functioning properly, perform the procedures below
starting with Procedure 1.  Continue with the other procedures as instructed.

Procedure 1:

Partition Check

Procedure 2:

Message Check

Procedure 3:

Format Check

Procedure 4:

Diagnostic Test Program Execution Check

NOTE

:  The contents of the hard disk will be erased when the HDD troubleshooting

procedures are executed.  Transfer the contents of the hard disk to a floppy disk(s) using
the BACKUP command in the Toshiba companion utility.  Refer to the 400 series User’s
Manual for more information about how to perform the BACKUP.

Procedure 1

Partition Check

Insert the Toshiba MS-DOS system disk and turn on the computer.  Then perform the follow-
ing checks:

Check 1

Type 

C:

 and press 

Enter

.  If you cannot change to drive C, go to Check 2.  If you

can change to drive C, go to Procedure 2.

Check 2

Type 

FDISK

 and press 

Enter

.  Choose Display Partition Information from the

FDISK menu.  If drive C is listed, go to Check 3.  If drive C is not listed, return to
the FDISK menu and choose the option to create a DOS partition on drive C.
Recheck the system.  If the problem still exists, go to Procedure 2.

Check 3

If drive C is listed as active in the FDISK menu, go to Check 4.  If drive C is not
listed as active, return to the FDISK menu and choose the option to set the active
partition for drive C.  Recheck the system.  If the problem still exists, go to Proce-
dure 2.

Check 4

Remove the system disk from the FDD and cold boot the computer.  If the prob-
lem still exists, go to Procedure 2.  Otherwise, the HDD is operating normally.

Summary of Contents for Satellite Pro 400CDT











































































































































































































Reviews:

No comments

Related manuals for Satellite Pro 400CDT

NEC VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION Manual preview
VERSA 6060 WINDOWS 98 - UPGRADE INFORMATION
Brand: NEC Pages: 4
Samsung NP680Z5E Guías Del Usuario Manual preview
NP680Z5E
Brand: Samsung Pages: 155
Samsung NP520U4C User Manual preview
NP520U4C
Brand: Samsung Pages: 154
Samsung NP270E5E Guías Del Usuario Manual preview
NP270E5E
Brand: Samsung Pages: 143
Samsung NP-X22 Guía Del Usuario preview
NP-X22
Brand: Samsung Pages: 186
Samsung Galaxy Book S Quick Reference Manual preview
Galaxy Book S
Brand: Samsung Pages: 2
Samsung Chromebook Troubleshooting Manual preview
Chromebook
Brand: Samsung Pages: 13
Gateway Notebook User Manual & Code Book preview
Notebook
Brand: Gateway Pages: 128
Gateway Notebook Setup Manual preview
Notebook
Brand: Gateway Pages: 2
Razer BLADE User Manual preview
BLADE
Brand: Razer Pages: 36
Acer Aspire 5332 Series Service Manual preview
Aspire 5332 Series
Brand: Acer Pages: 230
media-tech MT6350 Instruction Manual preview
MT6350
Brand: media-tech Pages: 13
EUROCOM W110ER Service Service Manual preview
W110ER Service
Brand: EUROCOM Pages: 102
IBM 365xX Hardware Maintenance Manual preview
365xX
Brand: IBM Pages: 222
NCS Cirrus LT Plus User Manual preview
Cirrus LT Plus
Brand: NCS Pages: 160
Ctl Chromebook PX14E User Manual preview
Chromebook PX14E
Brand: Ctl Pages: 12
Acer Predator PTX17-71 Lifecycle Extension Manual preview
Predator PTX17-71
Brand: Acer Pages: 44
Acer Aspire 5942G Quick Manual preview
Aspire 5942G
Brand: Acer Pages: 13

Brands by name

Popular brands

Load more brands