Toshiba Satellite Pro 400CDT User Manual Download Page 34

Page: 34 / 202

2-14

400 Series

Procedure 3

Printer Port LED Check on Resume Mode

The printer port LED displays the IRT status and test status by turning lights on and off as an
eight-digit binary value for resume mode.

To use the printer port LED follow these steps:

Turn the computer’s power on, then set to resume mode.

Turn the computer’s power off.

Plug the printer port LED into the 400 series parallel port.

Turn the computer’s power on.

Read the LED status from left to right as you face the back of the computer.

Convert the status from binary to hexadecimal notation.

If the final LED status is FFh (normal status), go to Procedure 4.

If the final LED status matches any of the test status values in table 2-2, perform
Procedure 5.

Table 2-2 Printer port LED resume mode error status

Error status

Meaning of status

F1H

RAM BIOS error

F2H

The system has optional ROM, or optional card (CGA, MDA)

F5H

Main memory checksum error

F6H

Video RAM checksum error

F7H

Extended memory checksum error

Procedure 4

Diagnostic Test Program Execution Check

Execute the following tests from the

Diagnostic Test

Menu. Refer to chapter 3,

Tests and

Diagnostics

, for more information on how to perform these tests.

System test

Memory test

Printer test

ASYNC test

Real Timer test

PCMCIA test

SOUND test

CD-ROM test

If an error is detected during these tests, go to Procedure 5.

Summary of Contents for Satellite Pro 400CDT











































































































































































































Search results

Summary of Contents for Satellite Pro 400CDT

Reviews:

Related manuals for Satellite Pro 400CDT

Brands by name

Popular brands

Toshiba Satellite Pro 400CDT, User Manual

Search results

Summary of Contents for Satellite Pro 400CDT

Reviews:

Related manuals for Satellite Pro 400CDT

Brands by name

Popular brands