manualshive.com logo in svg

Toshiba Satellite P20-25 Series, Maintenance Manual

Share
Download
Toshiba Satellite P20-25 Series Maintenance Manual Download Page 84

3.1  The Diagnostic Test 

3.  Tests and Diagnostics 

3.1  The Diagnostic Test 

This chapter explains how to use the Test & Diagnostic program to test the functions of the 
computer’s hardware modules.  The Test & Diagnostic Program is stored on the T&D 
diskettes. The program consists of a series of tests that run automatically when the 
Diagnostics Program items are selected and executed. 

NOTES: 

To start the diagnostics, follow these steps 

1.  Check all cables for loose connections. 
2.  Exit this program when you are at Main Menu. 

 
The TEST & DIAGNOSTIC PROGRAM contains the following functional tests: 

 

CONFIG CHECK TEST 

 

DMI CHECK TEST 

 

PIO LOOPBACK TEST 

 

IEEE1394 TEST 

 

SPEAKER AUDIO TEST 

 

FAN ON/OFF TEST 

 

MAIN BATTERY CHARGE TEST 

 

FDD TEST 

 

CD-ROM TEST 

 

KEYBOARD TEST 

 

MOUSE(PAD) TEST 

 

LCD PIXELS MODE TEST 

 

LID SWITCH TEST 

 

HDD R/W TEST 

 

LAN TEST 

 

RTC TEST 

 
You will need the following equipment to perform some of the Diagnostic test programs. 

 

The diagnostics diskette (2 pcs) 

 

A printer loopback connector (PIO Loopback Test) 

 

A formatted working diskette for the floppy disk drive test (Floppy Disk Drive Test) 

 

A data CD disc (CD-ROM Test) 

 

A LAN loopback connector (LAN Test) 

 

IEEE1394 Link Cable 

The following sections explain how to execute the Test & Diagnostic Program and detail the 
tests within the program.  

Satellite P20-25 Series Maintenance Manual 

3-1 

Summary of Contents for Satellite P20-25 Series



























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands