manualshive.com logo in svg

Toshiba Satellite P20-25 Series, Maintenance Manual

Share
Download
Toshiba Satellite P20-25 Series Maintenance Manual Download Page 127

4  Replacement Procedures 

4.4  Removable modules 

4.4 Removable 

modules 

The Satellite P20 features two bays for the insertion of removable modules. The main 
module bay may house an optical drive, a second HDD or an FDD. The 2nd module bay 
is generally used for the removable battery, but it may also be used with a second Optical 
Media Drive or a TV tuner module.  

This section covers removal and installation of devices from the main module bay. For 
removal and installation of devices from the 2

nd

 module bay, refer to Section 4.2, 

Battery

.  

Disassembly and assembly procedures for the optical drive, TV tuner, removable HDD 
and FDD are given in later sections.  

4-12 

Satellite P20-25 Series Maintenance Manual 

Summary of Contents for Satellite P20-25 Series



























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands