manualshive.com logo in svg

Toshiba Satellite P20-25 Series, Maintenance Manual

Share
Download
Toshiba Satellite P20-25 Series Maintenance Manual Download Page 32

1  Hardware Overview 

1.6 Batteries

 

 

Detection of full charge 

A full charge is detected from the battery pack through SMBus when the battery is 
charging. 

 

1.6.2 RTC battery 

The RTC battery provides power to keep the current date, time and other setup information in 
memory while the computer is turned off. The table below lists the charging time and data 
preservation period of the RTC battery. The RTC battery is charged by the adaptor or main 
battery, while the computer is powered on. 

 

 

 

 

 

 

Status   

 

 

 

 

Time 

Charging Time (power on) 

About 48 hours 

Data preservation period (full charge) 

2 month 

 

1-18 

Satellite P20-25 Series Maintenance Manual 

Summary of Contents for Satellite P20-25 Series



























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands