manualshive.com logo in svg

Toshiba Satellite P20-25 Series, Maintenance Manual

Share
Download
Toshiba Satellite P20-25 Series Maintenance Manual Download Page 25

1.4  Removable Drives 

1  Hardware Overview

 

 

1.4.3 DVD-ROM Drive 

The DVD-ROM drive (Toshiba SD-C2612 or Matsushita SR-8177) accommodates either 
12cm (4.72-inch) or 8cm (3.15-inch) CDs or DVDs.  
 

Transfer rates

 

Matsushita SR-8177:  The DVD-ROM drive is able to read CD-ROM, CD-R data at 10.3X to 

24X CAV mode speed and CD-RW data at 5.1X to 12X CAV mode 
speed. The drive has a transfer rate of max. 3 600 kbyte/s for CD-
ROM data, CD-R and max. 1 800 kbyte/s for CD-RW data. The drive 
is able to read DVD disc at CAV mode speed. The drive has a transfer 
rate of max. 11.08 Mbyte/s for DVD data. 

 
Toshiba SD-C2612:  Max.8X (DVD-ROM) / Max. 24X (CD-ROM)/2X (DVD-RAM 

Ver.1.0)/1X (DVD-RAM Ver.2.1) 
Max. 10,820 KByte/s (DVD-ROM)/Max. 3,600KByte/s (CD-ROM) 
Sustained Transfer Rate 

 

Buffer capacity

  

Matsushita SR-8177:  256 Kbytes (Max) 
Toshiba SD-C2612  192 Kbytes (Max) 
 

Supported formats

 

CD: 

CD-Audio 

CD-ROM (mode 1 and mode 2) 

CD-ROM XA (mode 2, form 1 and form 2) 

 

CD-I Bridge 

CD-I (mode 2, form 1 and form 2) 

CD-TEXT 

 

Video CD 

CD-RW 

Photo CD 

 

CD-WO** 

Enhanced Music CD (CD Plus)** 

CD-I Ready** 

 

CD+(E)G* CD-MIDI* 

CD-R* 

DVD: 

DVD-5 DVD-9 

DVD-10 

 

DVD-18* DVD-RAM 

(2.6G/4.7G) 

DVD-R 

(3.95G/4.7G) 

 

DVD-RW  

 

*   Toshiba SD-C2612 only 
** Matsushita SR-8177only 

Satellite P20-25 Series Maintenance Manual 

1-11 

Summary of Contents for Satellite P20-25 Series



























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands