Toshiba Qosmio X500 Maintenance Manual Download Page 52

Page: 52 / 277

2 Troubleshooting Procedures

Qosmio X500

Maintenance Manual (960-Q08)

Table 2-2 DC IN icon

DC IN icon

Power supply status

Lights red

DC power is being supplied from the AC adapter.

Blinks orange

Power supply malfunction

Doesn’t light

Any condition other than those above.

*1 When the power supply controller detects a malfunction, the DC IN icon blinks orange.

When the icon is blinking, perform the following procedure.

Remove the battery pack and the AC adapter.

Re-attach the battery pack and the AC adapter.

If the icon is still blinking after the operation above, check the followings:

Check 1 If the DC IN icon blinks orange, go to Procedure 2.

Check 2 If the DC IN icon does not light, go to Procedure 3.

Check 3 If the battery icon does not light orange or green, go to Procedure 4.

NOTE

: Use a supplied AC adapter.

Summary of Contents for Qosmio X500






















































































































































































































































































Search results

Summary of Contents for Qosmio X500

Reviews:

Related manuals for Qosmio X500

Brands by name

Popular brands

Toshiba Qosmio X500, Maintenance Manual

Search results

Summary of Contents for Qosmio X500

Reviews:

Related manuals for Qosmio X500

Brands by name

Popular brands