Toshiba Qosmio X500 Maintenance Manual Download

Page: 155 / 277

Test Program for Field.

3.21.4 Test Stop Display

If an error occurs during a Subtest and YES is selected for Error Stop, the following message
displays:

[HALT OPERATION]

Test end

Continue

Retry

* Select 1, 2, or 3

The three selections have the following functions:

1:  Terminates the test program and exits to the subtest menu.
2:  Continues the test from the error.
3:  Restarts the test from the beginning.

Use the arrow keys to move the cursor to the desired option and press Enter.

3.21.5 How to enter data

Letters which must be entered are always shown in [ ]. Simultaneous entries are displayed
by a “+” mark. For example:

[a] [Enter]

Press the “a” key, then press the [Enter] key.

[Ctrl] + [c]

Press the [Ctrl] key and the “c” key simultaneously.

Qosmio X500

Maintenance Manual (960-Q08)

Summary of Contents for Qosmio X500






















































































































































































































































































Search results

Summary of Contents for Qosmio X500

Reviews:

Related manuals for Qosmio X500

Brands by name

Popular brands

Toshiba Qosmio X500, Maintenance Manual

Search results

Summary of Contents for Qosmio X500

Reviews:

Related manuals for Qosmio X500

Brands by name

Popular brands