Replacement Procedures
4.11 Bluetooth module
Remove a Bluetooth module
The following describes the procedure for removing a Bluetooth module(see Figure4-11-1)
1.
Disconnect the Bluetooth cable from motherboard side
2.
Remove the following screw from TOP case and remove the Bluetooth bracket
2.5.0
x
3.0B BIND
screw x1
3.
Remove the Bluetooth module
Figure 4-11-1 Remove a Bluetooth module
Installing a Bluetooth module
The following describes the procedure for installing a Bluetooth module.
1.
Insert a
Bluetooth
into the connector on the computer.
2.
Connect the Bluetooth cable to the terminals on a Bluetooth and connect it to the
motherboard side.
3.
Install the Bluetooth bracket and secure it with following screw.
2.5.0
x
3.0B BIND
screw x1
Qosmio X500 Maintenance Manual (960-Q08)
4-34
Summary of Contents for Qosmio X500
