manualshive.com logo in svg

Toshiba Qosmio G10 Series, Maintenance Manual, Page: 41 / 392

Share
Download
Toshiba Qosmio G10 Series Maintenance Manual Download Page 41

1  Hardware Overview

  

1.7  Power Supply

 

 

1.7 Power 

Supply 

The power supply supplies 28 different voltages to the system board. 

The power supply microcontroller has the following functions. 

1.

 

Judges if the DC power supply (AC adapter) is connected to the computer. 

2.

 

Detects DC output and circuit malfunctions. 

3.

 

Controls the battery icon, and DC IN icon. 

4.

 

Turns the battery charging system on and off and detects a fully charged battery. 

5.

 

Turns the power supply on and off. 

6.

 

Provides more accurate detection of a low battery. 

7.

 

Calculates the remaining battery capacity. 

8.

 

Controls the transmission of the status signal of the main battery. 

Table 1-11 lists the power supply output specifications. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

QOSMIO G10  Maintenance Manual (960-497) 

 

1-27 

Summary of Contents for Qosmio G10 Series









































































































































































































































































































































































































Reviews:

No comments