manualshive.com logo in svg

Toshiba Qosmio G10 Series, Maintenance Manual, Page: 295 / 392

Share
Download
Toshiba Qosmio G10 Series Maintenance Manual Download Page 295

4.23  CPU 

4  Replacement Procedures    

3.

 

Unlock the 

CPU

 by rotating the 

cam

 on the CPU socket 180 degrees to the 

counterclockwise with a flat-blade screwdriver. 

4.

 

Remove the 

CPU

. 

 

Cam

Figure 4-45  Removing the CPU 

Installing the CPU 

The following describes the procedure for installing the CPU (See Figure 4-44 to 4-46). 

1.

 

Check that the mark of cam is in the unlocking position. 

2.

 

Attach the 

CPU

 to the correct position in the 

CPU socket

. 

3.

 

Fix the 

CPU

 by rotating the cam 180 degrees to the clockwise with a flat-blade 

screwdriver. 

4.

 

If there is already silicon grease on the CPU, clean it with a cloth. 
Using a special applicator, apply silicon grease so that the CPU chip on the CPU is 
completely covered. 

4-66 

 

QOSMIO G10  Maintenance Manual (960-497) 

Summary of Contents for Qosmio G10 Series









































































































































































































































































































































































































Reviews:

No comments