manualshive.com logo in svg

Toshiba Qosmio G10 Series, Maintenance Manual, Page: 172 / 392

Share
Download
Toshiba Qosmio G10 Series Maintenance Manual Download Page 172

3  Tests and Diagnostics  

3.24  Floppy Disk Drive Utilities

 

 

3.24.2 Operations 

1.

 

Selecting 

7

 from the DIAGNOSTIC MENU and pressing 

Enter

 displays the 

following message: 

[ FDD UTILITIES ] 

1 - FORMAT 

2 - COPY 

3 - DUMP 

4 – HDD-ID READ 

9 - EXIT TO DIAGNOSTICS MENU 

2.

 

FORMAT program 

(a)

 

Selecting FORMAT displays the following message: 

DIAGNOSTICS - FLOPPY DISK FORMAT : VX.XX 

Drive number select (1:A, 2:B) ? 

(b)

 

Select a drive number to display the following message: 

Type select (0:2DD, 3:2HD) ? 

(c)

 

Select a media/drive type number and press 

Enter

. A message similar to the 

one below will be displayed: 

Warning : Disk data will be destroyed. 

Insert work disk into drive A: 

Press any key when ready. 

(d)

 

Remove the Diagnostics Disk from the FDD, insert the work disk and press 
any key. 

The following message will be displayed when the FDD format is executed: 

[ FDD TYPE ] : TRACK  = XXX 

[ FDD TYPE ] : HEAD   = X 

[ FDD TYPE ] : SECTOR = XX 

Format start 

[[track, head = XXX X]] 

After the floppy disk is formatted, the following message will appear:  

Format complete 

Another format (1:Yes/2:No) ? 

(e)

 

Typing 

1

 displays the message from step (c) above. Typing 

2

 returns the test 

to the DIAGNOSTIC MENU. 

QOSMIO G10 Maintenance Manual (960-497) 

 

3-51 

Summary of Contents for Qosmio G10 Series









































































































































































































































































































































































































Reviews:

No comments