manualshive.com logo in svg

Toshiba Qosmio G10 Series, Maintenance Manual, Page: 215 / 392

Share
Download
Toshiba Qosmio G10 Series Maintenance Manual Download Page 215

3.31  SETUP 

3 Tests and Diagnostics

 

NOTE:

 Display of the LCD

 

Brightness will be changed in the condition below: 

   

   (*1) Operating the battery 

   

 

(*2) Using the AC adapter 

User Setting  

 

Use this option to set the battery save parameters on 

    the 

sub-window, 

BATTERY SAVE OPTIONS

. 

Battery Save Options 

Processing Speed 

This feature changes the CPU processing speed.  

High

 

   CPU 

operates 

at 

1.50/1.60/1.70/1.80/2.00/2.10GHz(Pentium-M), 
 (Default in Full Power Mode) 

Low

   

 

 

CPU operates at half processing speed. 

(Default in Low Power Mode) 

CPU Sleep Mode 

Use this option to enable or disable the CPU sleep function.  

Enabled

   

 

Enables sleep mode. (Default) 

Disabled

 

  Disables 

sleep 

mode. 

Display Auto Off 

Use this option to disable or set the duration of the display automatic power 
off function. This function causes the computer to turn the LCD panel’s 
illumination off if you make no entry (including no operation of a mouse or 
touch pad) for the set period of time. 

Disabled

   

 

Disables display automatic power off. 

xx Min.

   

 

Automatically turns off the power to the LCD panel’s 

 

 

 

 

 

illumination if the panel is not used for the duration set. 

     The 

duration 

xx

 can be set to 

1

, 

3

, 

5

, 

10

, 

15

, 

20

 or 

30

 

 

 

 

 

 

minutes. 

3-94 

 

QOSMIO G10  Maintenance Manual (960-497) 

Summary of Contents for Qosmio G10 Series









































































































































































































































































































































































































Reviews:

No comments