manualshive.com logo in svg

Toshiba Qosmio G10 Series, Maintenance Manual, Page: 322 / 392

Share
Download
Toshiba Qosmio G10 Series Maintenance Manual Download Page 322

 

Appendix A Handling the LCD Module 

3.

 

If the panel’s surface gets dirty, wipe it with cotton or a soft cloth. If it is still dirty, 
try breathing on the surface to create a light condensate and wipe it again.  

If the surface is very dirty, we recommend a CRT cleaning agent. Apply the agent to 
a cloth and then wipe the panel’s surface. Do not apply cleanser directly to the panel. 

 

4.

 

If water or other liquid is left on the panel’s surface for a long period, it can change 
the screen’s tint or stain it.  Be sure to quickly wipe off any liquid. 

 

A-2 

 

QOSMIO G10 Maintenance Manual (960-497) 

 

Summary of Contents for Qosmio G10 Series









































































































































































































































































































































































































Reviews:

No comments