manualshive.com logo in svg

Toshiba Qosmio G10 Series, Maintenance Manual, Page: 217 / 392

Share
Download
Toshiba Qosmio G10 Series Maintenance Manual Download Page 217

3.31  SETUP 

3 Tests and Diagnostics

 

4.

 

Password 

This option sets or resets the user password for power on and instant security 
(

Fn+F1

). 

Registered

 

 

 

The user password has been registered. 

Not registered

 

 

The user password has not been registered. 

For details on setting the user password, refer to the User’s Manual. 

5.

 

Boot Priority 

(a)

 

Boot Priority  

Use this option to set the priority for booting of the computer and the priority 
for the HDD for booting. 

FDD

→

HDD

→

CD-ROM

→

LAN:

  The computer looks for bootable files in 

the following order: FDD, HDD, CD-
ROM (*1) and LAN  

HDD

→

CD-ROM

→

LAN

→

FDD: 

The computer looks for bootable files in 
the following order: HDD, CD-ROM, 
LAN and FDD.

 

FDD

→

CD-ROM

→

LAN

→

HDD:

  The computer looks for bootable files in 

the following order: FDD, CD-ROM, 
LAN and HDD. 

CD-ROM

→

LAN

→

HDD

→

FDD:

  The computer looks for bootable files in 

the following order: CD-ROM, LAN, 
HDD and FDD. 

CD-ROM

→

LAN

→

FDD

→

HDD: 

The computer looks for bootable files in 
the following order: CD-ROM, LAN, 
FDD and HDD.

 

HDD

→

FDD

→

CD-ROM

→

LAN: 

The computer looks for bootable files in 
the following order: HDD, FDD, CD-
ROM and LAN. (Default) 

(*1) CD-ROM refers to a Optical Disk Drive. 

3-96 

 

QOSMIO G10  Maintenance Manual (960-497) 

Summary of Contents for Qosmio G10 Series









































































































































































































































































































































































































Reviews:

No comments