manualshive.com logo in svg

Toshiba Qosmio G10 Series, Maintenance Manual, Page: 143 / 392

Share
Download
Toshiba Qosmio G10 Series Maintenance Manual Download Page 143

3.11  Printer Test

 

3  Tests and Diagnostics

 

 

3.11 Printer Test 

CAUTION

:  Printer Test is not supported for this model. 

To execute the Printer Test, select 

6

 from the DIAGNOSTIC TEST MENU, press 

Enter

 

and 

follow the directions on the screen. The following messages will appear after selecting the 
Printer Test from the DIAGNOSTIC TEST MENU. Answer each of the questions with an 
appropriate response to execute the test. 

NOTE

: An IBM compatible printer must be connected to the system to execute this test. 

Also, printer port wraparound connector must be connected. 

The following message will appear, after selecting the subtest 01 to 03 of the printer test: 

channel#1 = XXXXh 

channel#2 = XXXXh 

channel#3 = XXXXh 

Select the channel number (1-3) ? 

The printer I/O port address is specified by the XXXXh number. The computer supports 
three printer channels. Select the printer channel number, and press 

Enter

 

to execute the 

selected subtest. 

Subtest 01 

Ripple Pattern 

This subtest prints characters for codes 20h through 7Eh line-by-line while 
shifting one character to the left at the beginning of each new line. 

 

3-22 

 

QOSMIO G10  Maintenance Manual (960-497) 

Summary of Contents for Qosmio G10 Series









































































































































































































































































































































































































Reviews:

No comments