manualshive.com logo in svg

Toshiba Qosmio G10 Series, Maintenance Manual, Page: 140 / 392

Share
Download
Toshiba Qosmio G10 Series Maintenance Manual Download Page 140

3  Tests and Diagnostics

  

3.9  Display Test

 

 

Subtest 06 

“H” Pattern Display 

This subtest displays a full screen of “H” patterns. 

HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 

To exit this subtest and return to the DISPLAY TEST menu, press

 Enter.

 

NOTE

: The last row may not be completely filled. This condition does not indicate on 

error. 

Subtest 07 

LCD Brightness 

The LCD brightness changes in the following order: 

Super-Bright  —>  Bright  —>  Semi-Bright —>  Bright  —>  Super-Bright 
 
After displaying with Super-Bright of LCD brightness, return to the 
DISPLAY TEST menu. 

QOSMIO G10  Maintenance Manual (960-497) 

 

3-19 

Summary of Contents for Qosmio G10 Series









































































































































































































































































































































































































Reviews:

No comments