manualshive.com logo in svg

Toshiba Qosmio G10 Series, Maintenance Manual, Page: 199 / 392

Share
Download
Toshiba Qosmio G10 Series Maintenance Manual Download Page 199

3.29  LAN/Modem/Bluetooth/IEEE1394 Test Program 

3  Tests and Diagnostics

 

 

Table 3-6  Error code for Bluetooth test (BD_ADDR) (2/2) 

Error code 

 Meaning 

0x20 

 Unsupported LMP Parameter Value. 

0x21 

 Role Change Not Allowed. 

0x22 

 LMP Response Timeout. 

0x23 

 LMP Error Transaction Collision. 

0x24 

 LMP PDU Not Allowed. 

0x25 

 Not Exist 

0x26 

 Not Exist 

0x27 

 Not Exist 

0x28 

 Not Exist 

0x29 

 Not Exist 

0x2a 

 Not Exist 

0x2b 

 Not Exist 

0x2c 

 Not Exist 

0x2d 

 Not Exist 

0x2e 

 Not Exist 

0x2f 

 Not Exist 

** See the Specification of the Bluetooth System in detail. 

Subtest03 

Communication test  (DUT mode) 

This subtest checks the Bluetooth communication functions. Preparing the tester machine for 
the Bluetooth test program. Insert a floppy disk containing the test program into the tester 
machine and turn on the tester machine. The Bluetooth test menu will appear: 

Press 

3

 to select the test and press 

Enter

 in the target machine. The following message will 

appear: 

When the test begins, the machine displays 

BD_ADDR of the DUT

. The progress bar 

stops when the test is completed. The following message is displayed. 

----------------------------------------------------------------------------- 
Bluetooth Subsystem T&D for PCSE(CS-Air) VerX.XX  Copyright (C) by TOSHIBA Co. 
----------------------------------------------------------------------------- 
+----------------------+ 
|          DUT         |   BD_ADDR of the DUT = XXXXXXXXXXXXX [h] 

+----------------------+ 
 
 

     Ready>>>>>>>>>>>>>>>>>>>>>>       <- 

Progress Bar

 

                               
 
 

[ESC] : Stop 

 

3-78 

 

QOSMIO G10 Maintenance Manual (960-497) 

Summary of Contents for Qosmio G10 Series









































































































































































































































































































































































































Reviews:

No comments