background image

3.

Start composing your note by attaching one of the following items:

Camera(

)

Tap to activate your computer’s built-in camera. Capture anything
you like and create as a note.

Pictures(

)

Tap to import an image from your computer.

Sketch(

)

Tap to draw on the canvas, and save the painting as a note.

Text(

)

Tap to type texts using the physical/on-screen keyboard.

4.

(Optional)Tap 

Set as cover(

)

 to set the created note as the

notebook cover. Notebook cover is the thumbnail you see in the
notebook pane. By default, the first created note is the notebook
cover.

5.

(Optional)You can also attach an audio recording to the notebook. Tap

 to start recording, and tap again to stop. Tap 

 to play the audio

recording.
You can create an audio recording up to 180 minutes long.

Editing a note

To edit a note, do the following:
1.

Tap a note in the notebook to enter the preview mode.

2.

Swiping from the top or bottom edge of the screen to bring up the
command bar, and then tap 

Edit(

)

 to enter the edit mode.

Available editing options are detailed below. Depending on the note format
(text, sketches, audio or images), the options might vary.

Crop(

)

Drag the handles to select an area to keep in the image.

Tap 

Uncrop

 ) will reset the handles.

Auto Crop

 is provided specifically for improving snapshots of

whiteboards, printed materials, and so on. You can enable it by
swiping from the right edge of the screen, tap 

Settings -> Options ->

Image Optimization

, and select 

Auto Crop

.

Rotate(

/

)

Tap 

Rotate left

 or 

Rotate right

 to rotate the image.

Contrast

Select a pre-set effect to adjust image contrast.

User's Manual

5-14

Summary of Contents for PORTEGE WT20-B Series



























































































































































Reviews: